Pressed water tank Sectional Tank For Drinking
Galvanized Steel Combined Water Tank is punched by Q235A into 1220mm*1220mm or 1000mm*1000mm and 1000mm*500mm, 500mm*500mm standard panels, drilling around, after HDG treatment, assembly at site. When combined, the gap between two standard panels is sealed by silicon pad, connected by bolts.
Galvanized Steel Water Tank
0.5*0.5m, 1*1m, 1*0.5m, etc
3mm,2.5mm,2mm,1.5mm, it is different according the size of the tank.
Arc argon welding or bolt link
Product Show :
Water capacity varies from 1.0 cubic meter to 1000 cubic meters, height may reach as great as 5 meters.
Inflow, outflow tubes as well as return tube's diameter and place is decided by the designer, passages of at least 7000mm is needed around the tank.
1. Easy handle and install,free volume design,no leakage,ideal mechanical structure and meet fire and building standard.
2. Anti-corrosion, anti-aging, no distorsion, no infiltration .
3. Easy to clean and conveniently to install and assemble.
4. It can storage not only hot water, but also cold water, and has a better shockproof and shock resistant abilit
Bolt. nut & washers: stainless steel 304 material.
Sealing material: Non-toxic P.V.C foam tape shall be used in between the joints
Covers:The tank cover shall be constructed from 1.2mm to 3.0mm of thickness stainless steel 304 material according to the requirement
Flanges :The sectional panels shall be pressed to double flanges at the angles of 45 degree and 90 degree to the face of the plate on four sides.
Reinforcement Method :All tanks are internally braced with angle stays to endure the rigidity of the tank when filled with the water. The Top panel is supported by top panel support, which shall be made of stainless steel grade 304 or 316 material according to requirement.
1.When you order should provide water tank size, take over the place, diameter size.
2.Water tank can be supporting supply.
3.Use water injection temperature for the 4-65 is advisable. Water injection temperature higher than the value can be put forward in order to separately solve.
4.Water tank inside and outside of the other welding not welding, prevent damage porcelain face.
5.Water tank to the ground under should with structure design personnel for approval shall prevail.
6.Water tank should be regularly cleaned, try to prevent water into the trash.
Looking for ideal Steel Galvanzied Storage Tank Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Assembly HDG Water Tank are quality guaranteed. We are China Origin Factory of Steel Sectional Water Tank. If you have any question, please feel free to contact us.
Product Categories : Water Tank > Hot Dip Galvanized Water Tank